Complete size cutting line Paul manufacture: 1998

Lager-Nummer: 8726 Kategorien: , , Info

Complete size cutting line with cross cut saw Paul GE 18
Year of manufacture: 1998

-Chain transporter with lifting platform
-Roller track
-Cross cut saw Paul, type 18 E, 12,5 kW
-Roller track
-Transport band with sorting roll
-Throw out station for short pieces
-Transport band
-Centering station
-Multi rip saw Paul, type K 34 O/800 GL, 90 kW
working width 800 mm, sawblade diam. 210 mm, 5200 rpm,
synchronous run machine, saw spindle diameter 60 mm

hydraulic pump 5,5 kW and other units 5 kW

The line is completely in good working condition, incl. control cabinets, aprox. 6 saw spindles with saws, distance rings, and full documentation

The line was used to cut hardwood of the following sizes:
Wood thickness 26 mm – 50 mm
Infeed length to the cross cut saw 1000 – 5000 mm or longer
Working Length of the multi rip saw 350 mm – 1000 mm
Strip width 4 – 50 mm depending on the number of sawblades on the saw spindle

Working process:
Start material: Beechwood 42 mm thickness, length 4000 mm
The operator lays the board on the roller track and the roller track transports the wooden board to the cross cut saw. The control is programmed with one main length and several
short sizes.

On this line length from 350 mm to 1000 mm can be cut.
After the board is shortened it runs on a transport band to a roller track.
Between transport band and roller track is a mangel roll to sort out short piece for burning wood. After the mangel roll is a throw out station.

The main length are running into the multi rip saw with the centering unit.
There the wood will be cut into strips. Strips of a width between 8 mm and 25 mm can be cut. With a different equipped sawspindle strips of a width between 4 mm and 45 mm
can be cut. The saw works in a synchronous mode.
The wooden strips leave the multi rip saw on a roller track.

Anfrage / inquiry